Machine Sentry MSF2-L fixed condition monitoring sensor
Machine Sentry MSF2-L

Slow speed.
Fast insight.

Fixed wireless monitoring for lower-speed machinery, low-level vibration and structural applications.

Monitoring
Low-noise tri-axial vibration + thermistor temperature
Protection
IP67
Battery life
Up to 5 years under stated fixed-use/configuration
Machine Sentry MSF2-L fixed condition monitoring sensor
Machine Sentry MSF2-L

Slow speed.
Fast insight.

Fixed wireless monitoring for lower-speed machinery, low-level vibration and structural applications.

Monitoring
Low-noise tri-axial vibration + thermistor temperature
Protection
IP67
Battery life
Up to 5 years under stated fixed-use/configuration

Machine Sentry MSF2-L

Greater visibility at lower speeds.

Fixed wireless monitoring for lower-speed machinery, low-level vibration and structural applications.

MSF2-L uses a low-noise tri-axial MEMS measurement architecture and switchable measurement ranges to reveal more detail where vibration amplitudes are low.

App & Bluetooth Connectivity

Connects by Bluetooth LE 5.2 to compatible Android devices running the Machine Sentry App, or transfers data using a compatible Machine Sentry Gateway.

Long-Life Battery

Up to five years under stated fixed-use and configuration conditions.

Switchable Range

Switchable ±2 g / ±4 g / ±8 g / ±16 g measurement ranges help match the sensor response to lower vibration amplitudes.

Hazardous-Area Certified

ATEX / HAZLOC / IECEx. Certified for Gas Zone 0 / Dust Zone 20 applications, subject to the applicable certification and installation requirements.

Machine Sentry MSF2-L vibration and temperature sensor
Onboard Memory

100 MB storage for up to 1,000 reading sets at full resolution.

Low-Noise Tri-Axial MEMS

Low-noise three-axis MEMS measurement with an inbuilt thermistor temperature sensor.

Sealed to IP67

IP67 enclosure protection for demanding industrial deployments.

Machine Sentry Connected

Collected measurements connect into the Machine Sentry environment for trending, analysis and reliability workflows.

Machine Sentry MSF2-L

Greater visibility at lower speeds.

Fixed wireless monitoring for lower-speed machinery, low-level vibration and structural applications.

MSF2-L uses a low-noise tri-axial MEMS measurement architecture and switchable measurement ranges to reveal more detail where vibration amplitudes are low.

App & Bluetooth Connectivity

Connects by Bluetooth LE 5.2 to compatible Android devices running the Machine Sentry App, or transfers data using a compatible Machine Sentry Gateway.

Long-Life Battery

Up to five years under stated fixed-use and configuration conditions.

Switchable Range

Switchable ±2 g / ±4 g / ±8 g / ±16 g measurement ranges help match the sensor response to lower vibration amplitudes.

Hazardous-Area Certified

ATEX / HAZLOC / IECEx. Certified for Gas Zone 0 / Dust Zone 20 applications, subject to the applicable certification and installation requirements.

Machine Sentry MSF2-L vibration and temperature sensor
Onboard Memory

100 MB storage for up to 1,000 reading sets at full resolution.

Low-Noise Tri-Axial MEMS

Low-noise three-axis MEMS measurement with an inbuilt thermistor temperature sensor.

Sealed to IP67

IP67 enclosure protection for demanding industrial deployments.

Machine Sentry Connected

Collected measurements connect into the Machine Sentry environment for trending, analysis and reliability workflows.

Low-noise sensing

Designed to reveal subtle vibration behaviour.

Lower-speed machinery and low-level vibration call for measurement sensitivity matched to the application. MSF2-L combines low-noise tri-axial MEMS sensing with switchable amplitude ranges.

Focus 01

Low-noise tri-axial measurement

Three-axis low-noise sensing is designed to capture detail in lower-level vibration signals, including structural monitoring applications.

Application focus
Subtle signals.
Clearer insight.

Focus 02

Switchable measurement ranges

Choose from ±2 g, ±4 g, ±8 g or ±16 g to align the measurement range with vibration amplitude.

The maximum amplitude range is ±16 g. Select the sensor to match the expected operating characteristics of the asset.

Low-noise sensing

Designed to reveal subtle vibration behaviour.

Lower-speed machinery and low-level vibration call for measurement sensitivity matched to the application. MSF2-L combines low-noise tri-axial MEMS sensing with switchable amplitude ranges.

Focus 01

Low-noise tri-axial measurement

Three-axis low-noise sensing is designed to capture detail in lower-level vibration signals, including structural monitoring applications.

Application focus
Subtle signals.
Clearer insight.

Focus 02

Switchable measurement ranges

Choose from ±2 g, ±4 g, ±8 g or ±16 g to align the measurement range with vibration amplitude.

The maximum amplitude range is ±16 g. Select the sensor to match the expected operating characteristics of the asset.

Machine Sentry App

Low-level measurements, ready for review.

The Machine Sentry app is the field interface for local condition monitoring activity, connecting compatible hardware, route-based collection, asset navigation, review and field actions to the wider Machine Sentry history.

Android smartphone showing the Machine Sentry App screen

Collect and review in the field

Connect to compatible Machine Sentry hardware, collect condition data and review vibration spectra, time waveform and related asset information at the machine.

Navigate assets faster

Routes, asset navigation and QR, barcode or NFC-supported workflows help technicians get to the right monitoring point and keep activity tied to the correct asset record.

Manage fixed sensors

Configure and collect from compatible fixed Machine Sentry sensors, including MSF2-L and other compatible fixed sensors, as part of the same field workflow.

Turn findings into action

Photos, actions and field observations can be recorded alongside condition data and synchronised into the wider Machine Sentry asset history.

Machine Sentry App

Low-level measurements, ready for review.

The Machine Sentry app is the field interface for local condition monitoring activity, connecting compatible hardware, route-based collection, asset navigation, review and field actions to the wider Machine Sentry history.

Android smartphone showing the Machine Sentry App screen

Collect and review in the field

Connect to compatible Machine Sentry hardware, collect condition data and review vibration spectra, time waveform and related asset information at the machine.

Navigate assets faster

Routes, asset navigation and QR, barcode or NFC-supported workflows help technicians get to the right monitoring point and keep activity tied to the correct asset record.

Manage fixed sensors

Configure and collect from compatible fixed Machine Sentry sensors, including MSF2-L and other compatible fixed sensors, as part of the same field workflow.

Turn findings into action

Photos, actions and field observations can be recorded alongside condition data and synchronised into the wider Machine Sentry asset history.

Connected monitoring

Connected from asset to action.

MSF2-L can be collected locally through the Machine Sentry App on a compatible Android device or connected through a compatible Gateway for unattended transfer across wider fixed-sensor deployments. Both routes keep the monitoring point connected to the same Machine Sentry condition monitoring environment.

01 / Asset

Machine condition

Vibration and contact temperature are captured from a defined monitoring point.

02 / Sensor

MSF2-L

The fixed wireless sensor stores and transmits condition data from the asset.

03 / Connect

App or Gateway

Collect locally through the Machine Sentry app on a compatible Android device, or automate transfer through a Gateway.

04 / Platform

Machine Sentry

Condition data becomes available in Machine Sentry for trending, analysis, alarms, reporting and the wider asset history.

05 / Action

Remote diagnostics

Condition data can be reviewed and interpreted remotely by an in-house reliability team or the Remote Diagnostic Centre, helping investigate change and define the next action.

Connected monitoring

Connected from asset to action.

MSF2-L can be collected locally through the Machine Sentry App on a compatible Android device or connected through a compatible Gateway for unattended transfer across wider fixed-sensor deployments. Both routes keep the monitoring point connected to the same Machine Sentry condition monitoring environment.

01 / Asset

Machine condition

Vibration and contact temperature are captured from a defined monitoring point.

02 / Sensor

MSF2-L

The fixed wireless sensor stores and transmits condition data from the asset.

03 / Connect

App or Gateway

Collect locally through the Machine Sentry app on a compatible Android device, or automate transfer through a Gateway.

04 / Platform

Machine Sentry

Condition data becomes available in Machine Sentry for trending, analysis, alarms, reporting and the wider asset history.

05 / Action

Remote diagnostics

Condition data can be reviewed and interpreted remotely by an in-house reliability team or the Remote Diagnostic Centre, helping investigate change and define the next action.

Machinery & applications

Visibility where vibration levels are low.

MSF2-L is designed for lower-speed machinery, low-level vibration and structural monitoring, using low-noise tri-axial measurement at a fixed point.

Best-fit use

A dedicated fixed sensor for subtle vibration behaviour.

For lower-speed machine trains around 1,200 rpm and below, MSF2-L offers a low-noise measurement architecture for applications where useful vibration amplitudes can be small.

Measures Low-noise tri-axial vibration + inbuilt thermistor
Approach Fixed wireless monitoring
Use Lower-speed and low-level vibration
01

Lower-speed motors, pumps and fans

Fixed measurement points for lower-speed machinery where useful vibration signals are relatively low.

02

Low-level vibration applications

Suited to low-amplitude vibration signals where a low-noise measurement architecture helps reveal useful detail.

03

Structural monitoring

Designed for applications where low-level vibration behaviour and structure response require greater visibility.

04

Lower-speed machine trains

Particularly relevant to machine trains operating around 1,200 rpm and below.

Machinery & applications

Visibility where vibration levels are low.

MSF2-L is designed for lower-speed machinery, low-level vibration and structural monitoring, using low-noise tri-axial measurement at a fixed point.

Best-fit use

A dedicated fixed sensor for subtle vibration behaviour.

For lower-speed machine trains around 1,200 rpm and below, MSF2-L offers a low-noise measurement architecture for applications where useful vibration amplitudes can be small.

Measures Low-noise tri-axial vibration + inbuilt thermistor
Approach Fixed wireless monitoring
Use Lower-speed and low-level vibration
01

Lower-speed motors, pumps and fans

Fixed measurement points for lower-speed machinery where useful vibration signals are relatively low.

02

Low-level vibration applications

Suited to low-amplitude vibration signals where a low-noise measurement architecture helps reveal useful detail.

03

Structural monitoring

Designed for applications where low-level vibration behaviour and structure response require greater visibility.

04

Lower-speed machine trains

Particularly relevant to machine trains operating around 1,200 rpm and below.

Technical specifications

Technical Specification

Controlled MSF2-L engineering information for measurement, connectivity, power and deployment.

Measurement
Internal sensing
Low-noise tri-axial MEMS (3 axes) + inbuilt thermistor
Maximum internal accelerometer frequency
6,000 Hz on all axes
FMax
200–10,000 Hz
Sampling
512–25,600 samples/s
Amplitude range
Switchable ±2 g / ±4 g / ±8 g / ±16 g
A2D resolution
16 bit
Maximum spectral lines
Up to 12,800 mobile / 6,400 fixed
Temperature measurement
-40 to +115 °C
Connectivity
Wireless communication
Bluetooth LE 5.2
Frequency band
2.4 GHz
Mobile platform
Recommended Android 11+ using Machine Sentry App
Gateway
Compatible Machine Sentry Gateway
Power & storage
Battery
Lithium 3.6 V C Cell; 8500 mAh
Battery life
Up to 5 years under stated fixed-use/configuration
Storage
100 MB; 1,000 reading sets at full resolution
Physical
Case material
316 stainless steel / polycarbonate
Ingress protection
IP67
Operating temperature
-20 to +60 °C
Storage temperature
10 to 25 °C

Technical specifications

Technical Specification

Controlled MSF2-L engineering information for measurement, connectivity, power and deployment.

Measurement
Internal sensing
Low-noise tri-axial MEMS (3 axes) + inbuilt thermistor
Maximum internal accelerometer frequency
6,000 Hz on all axes
FMax
200–10,000 Hz
Sampling
512–25,600 samples/s
Amplitude range
Switchable ±2 g / ±4 g / ±8 g / ±16 g
A2D resolution
16 bit
Maximum spectral lines
Up to 12,800 mobile / 6,400 fixed
Temperature measurement
-40 to +115 °C
Connectivity
Wireless communication
Bluetooth LE 5.2
Frequency band
2.4 GHz
Mobile platform
Recommended Android 11+ using Machine Sentry App
Gateway
Compatible Machine Sentry Gateway
Power & storage
Battery
Lithium 3.6 V C Cell; 8500 mAh
Battery life
Up to 5 years under stated fixed-use/configuration
Storage
100 MB; 1,000 reading sets at full resolution
Physical
Case material
316 stainless steel / polycarbonate
Ingress protection
IP67
Operating temperature
-20 to +60 °C
Storage temperature
10 to 25 °C

Certifications

Certified for demanding environments.

MSF2-L is certified for Gas Zone 0 and Dust Zone 20 applications. The product-specific approvals are listed below.

ATEX
Hazardous-area certification
CML 22ATEX2395X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
UKEX
UK hazardous-area certification
CML 22UKEX2396X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
IECEx
International certification
IECEx CML 22.0054X. Ex ia IIC T4 Ga; Ex ia IIIC T135°C Da. IEC 60079-0:2017 Ed. 7; IEC 60079-11:2011 Ed. 6. Ambient: -20°C ≤ Ta ≤ +60°C.
HAZLOC
North American hazardous locations
MET E115629. Class I and II Division 1 Groups A–D T4; Class II Division 1 Groups E–G T135°C. Class I Zone 0 AEx ia IIC T4 Ga; Class II Zone 20 AEx ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
ICASA
South African type approval
ICASA TA-2023/3564.
Gas
Zone 0
Dust
Zone 20

Certifications

Certified for demanding environments.

MSF2-L is certified for Gas Zone 0 and Dust Zone 20 applications. The product-specific approvals are listed below.

ATEX
Hazardous-area certification
CML 22ATEX2395X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
UKEX
UK hazardous-area certification
CML 22UKEX2396X. II 1G Ex ia IIC T4 Ga; II 1D Ex ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
IECEx
International certification
IECEx CML 22.0054X. Ex ia IIC T4 Ga; Ex ia IIIC T135°C Da. IEC 60079-0:2017 Ed. 7; IEC 60079-11:2011 Ed. 6. Ambient: -20°C ≤ Ta ≤ +60°C.
HAZLOC
North American hazardous locations
MET E115629. Class I and II Division 1 Groups A–D T4; Class II Division 1 Groups E–G T135°C. Class I Zone 0 AEx ia IIC T4 Ga; Class II Zone 20 AEx ia IIIC T135°C Da. Ambient: -20°C ≤ Ta ≤ +60°C.
ICASA
South African type approval
ICASA TA-2023/3564.
Gas
Zone 0
Dust
Zone 20

Explore the range

MONITOR MORE

Choose, combine and connect the monitoring that fits your assets.

Machine Sentry MSF2 sensor
Fixed monitoring

MSF2

For broad fixed wireless vibration and temperature monitoring where a permanent point improves repeatability and regular asset visibility.

View MSF2
Machine Sentry MSF2-L sensor
Low-speed monitoring

MSF2-L

For lower-speed machinery, low-level vibration and structural monitoring where greater sensitivity to subtle vibration behaviour is required.

View MSF2-L
Machine Sentry MSF-Pro sensor
Advanced fixed input

MSF-Pro

For fixed wireless condition monitoring that also needs a compatible external accelerometer or speed-reference input.

View MSF-Pro
Machine Sentry MSM2 sensor
Portable diagnostics

MSM2

For portable route-based vibration monitoring, troubleshooting and hands-on diagnostic work where the measurement point needs to move with the engineer.

View MSM2

Machine Sentry

See Machine Sentry in action.

See how the right mix of sensors, software and monitoring methods can work together across your assets, then build the Machine Sentry system around the application.

Explore the range

MONITOR MORE

Choose, combine and connect the monitoring that fits your assets.

Machine Sentry MSF2 sensor
Fixed monitoring

MSF2

For broad fixed wireless vibration and temperature monitoring where a permanent point improves repeatability and regular asset visibility.

View MSF2
Machine Sentry MSF2-L sensor
Low-speed monitoring

MSF2-L

For lower-speed machinery, low-level vibration and structural monitoring where greater sensitivity to subtle vibration behaviour is required.

View MSF2-L
Machine Sentry MSF-Pro sensor
Advanced fixed input

MSF-Pro

For fixed wireless condition monitoring that also needs a compatible external accelerometer or speed-reference input.

View MSF-Pro
Machine Sentry MSM2 sensor
Portable diagnostics

MSM2

For portable route-based vibration monitoring, troubleshooting and hands-on diagnostic work where the measurement point needs to move with the engineer.

View MSM2

Machine Sentry

See Machine Sentry in action.

See how the right mix of sensors, software and monitoring methods can work together across your assets, then build the Machine Sentry system around the application.